產品型號：JSY0301產品名稱：液化石油氣銅片腐蝕實驗儀JSY0301產品說明：JSY0301液化石油氣銅片腐蝕實驗儀一、符合SH/T0232、ISO6251、ASTMD1838標準二、主要技術參數：溫度范圍：常溫～50±0

詳細介紹

產品型號：JSY0301

產品名稱：液化石油氣銅片腐蝕實驗儀JSY0301

產品說明：

JSY0301液化石油氣銅片腐蝕實驗儀

一、符合SH/T0232、ISO6251、ASTM D1838標準

二、主要技術參數：

溫度范圍：常溫～50±0.5℃

加熱方式：電熱管加熱

控溫方式：數顯溫控

單元結構：2單元

工作電源：AC220V±10% 50HZ

三、性能及特點：

1、儀器采用全不銹鋼制作，進口溫度控制器控溫，控溫精度高，使用壽命長，能在常溫至100℃內任何一點進行溫度自動控制；

2、采用快速接頭連接氣源與試驗彈，裝卸方便；

3、采用電熱管加熱的方式，加熱速度快，儀器配有兩支試驗彈，可同時做樣進行對比；

4、采用數顯時間定時器計時，顯示直觀準確，并能定時報警。

JSY0301 LPG copper sheet corrosion tester

I. Comply with SH/T0232, ISO6251, ASTM D1838 standards

Ii. Main Technical parameters:

Temperature range: normal temperature ~ 50±0.5℃

Heating mode: Electric heat pipe heating

Temperature control: digital display temperature control

Unit structure: 2 units

Power supply: AC220V±10% 50HZ

Iii. Performance and Characteristics:

1, the instrument is made of all stainless steel, imported temperature controller temperature control, temperature control precision is high, long service life, can be at room temperature to 100℃ at any point for automatic temperature control;

2. Adopt quick joint to connect air source and test bomb, easy to load and unload;

3. Adopt electric heat pipe heating method, heating speed is fast, the instrument is equipped with two test bombs, which can make samples for comparison at the same time;

4, the use of digital display time timer, display intuitive and accurate, and time alarm.

關鍵詞：溫度控制器