環(huán)保在線
詳細(xì)介紹
DAT 500
Weighing Instrumentation Weight Transmitters
Weighing
· RS232 or RS422/RS485 output, ASCII Protocols or MODBUS RTU
· High performance and reliability
· Bipolar version ± 10V
· Upload and download function for programming with 1006 TESTER
· Directly connectable to PROFIBUS Fieldbus and to DEVICENET with optional internal board
· The connection can also be done through the external converter
· 10 points linearization
· Calibration done using certificates of transducers
· Configuration and calibration from the front panel or PC via the USB serial port, RS232/RS485 with the program INNOVATION™ (MS Windows)
· IP54 protection (front panel)
TECHNICAL CHARACTERISTICS DAT 500
| Trasducer input voltage: | 5 V (max 6 load cells 350 Ohm) |
| Measuring range: | -0.5÷+3..5 mV/V (-3.9÷+3.9 mV/V optional) |
| Input sensitivity: | 0.02 µV/ per count |
| Linearity: | <0.01% of full scale |
| Gain drift: | <0.001% full scale/ °C |
| Display: | 6 digit, red LED (7 segments), h 14 mm |
| LED status: | 4 red |
| A/D Converter: | 24 bit |
| Resolution: | > 16.000.000 counts |
| Visible resolution: | 60.000 divisions displayable on net weight |
| Divisions value (adjustable): | x1, x2, x5 |
| Set decimal: | 0.0 ; 0.00 ; 0.000 |
| Filter: | 0.1 ÷ 25 Hz adjustable |
| Keyboard: | 4 tactile feedback buttons |
| Tool voltage: | 24 V c.c. ±15% - power 5 W |
| Temperature range: | -10 ÷ +50 °C |
| Storage temperature: | -20 ÷ +70 °C |
| Logic output: | 2 relays (clean contact) MAX 24 V c.c./100 mA cad. |
| Logic input: | 2 optoisolated 24 V c.c. PNP (External voltage) |
| Serial door: | USB, RS232C or RS422/RS485 with ASCII or Modbus RTU protocols |
| Transmission distance: | 15m (RS232C), 1000m (RS422 e RS485) |
| FIELDBUS protocol: | PROFIBUS, DEVICENET (opzional) |
| Others fieldbus comunication: | CANopen, Modbus-Plus, Ethernet and other |
| Peak Hold function: | for dynamic measures |
| Baud rate: | 2400, 9600, 19200, 38400, 115200 adjustable |
| Analogic optional output: | optoisolated 16 Bit Tension: 0÷5/10V (R min10 K Ohm) Current: 0/4÷20mA (R max 300 Ohm) |
| Regulatory compliance: | EN61326-1, EN55011 and EN55014 for EMC; EN61010-1 for electrical security |
| Electrical connection: | Terminal screw pass 5 mm |
| Dimensions and weight: | 96 x 48 x 120 mm (L x H x D); 250 g |
| Drilling template: | 92 x 45 mm (L x H) |
| BCD output: | optional |
所有型號(hào)：
dat 400
dat 450
dat-s 400
dat 500
gateway 300 comunicator
lc 100
mc 102
mcs 102
mc 302
mc s 302
uwt 600
uwt 600i i box 20004
更多稱重傳感器推薦
稱重傳感器，壓力傳感器，加速度傳感器，加速度傳感器，扭矩傳感器
環(huán)保在線