當前位置：柯布自控系統（上海）有限公司>>意大利SGM>>進口明渠流量計

進口明渠流量計

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號VL

品牌

廠商性質代理商

所在地上海市

在線詢價 收藏產品查看聯系電話

聯系方式：李先生查看聯系方式

更新時間：2018-04-22 23:23:20瀏覽次數：718次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  意大利SGM

全部產品列表

暫無信息

柯布自控系統（上海）有限公司

經營模式：代理商

商鋪產品：38條

所在地區：上海上海市

聯系人：李先生（銷售）

詢價 給他留言

產品簡介

進口明渠流量計The non intrusive system application is now preferred in the open channel flow measurements field. For this reason the SGM-LEKTRA developed theFLOWMETER unity to best meet the application reque

詳細介紹

General Information

The non intrusive system application is now preferred in the open channel flow measurements field. For this reason the SGM-LEKTRA developed theFLOWMETER unity to best meet the application requests.
The FLOWMETER unit offers, together with its compact size, a easy start up.
FLOWMETER is an ultrasonic flow transmitter, temperature-compensated and suitable for connection with MODBUS RTU acquisition systems.
FLOWMETER in addition to an analog output includes two freely addressable relay for flow threshold or for totalizer pulse output.

	Solution with high price/performance ratio		MODBUS RTU com. protocol
	Suitable for each channel/Weir		Output: 1 4÷20mA analog output
	also non-standard		Output: 2 relays output
	Flow rate and flow totalizer measure		Power supply 24Vdc
	IP67 execution; IP68 sensor

Technical Data

Housing material	PC or Al / PP wetted part
Mechanical installation	2"GAS M (PP flange DN50 or DN 80 opt.)
Protection degree	IP67 / IP68 sensor
Electrical connection	Internal push connectors
Working temperature	-30 ÷ +70°C; +80°C non-continuous
Pressure	from 0,5 to 1,5 bar (absolute)
Power supply	24Vdc
Power consumption	max 1,5W
Analog output	4÷20mA, max 750ohm
Relays output	n°2 3A 230Vac (n.o.)
Digital communication	MUDBUS RTU
Max measure range	max 0.25÷5m [In case of non perfectly reflecting surfaces, the maximu distance value will be reduced]
Blind distance	0,25m
Temperature compensation	digital from -30 to 80°C
Accuracy	±0,5% (of the measured distance) not better than ±3mm
Resolution	1mm
Calibration	4 buttons or by MODBUS RTU
Warm-up	5 minutes typical
LCD Display	Plug-in display/keyboard 4 buttons matrix LCD