當前位置：柯布自控系統（上海）有限公司>>意大利SGM>>意大利SGM電磁流量計

意大利SGM電磁流量計

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號FM

品牌

廠商性質代理商

所在地上海市

在線詢價 收藏產品查看聯系電話

聯系方式：李先生查看聯系方式

更新時間：2018-04-22 03:47:18瀏覽次數：365次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  意大利SGM

全部產品列表

暫無信息

柯布自控系統（上海）有限公司

經營模式：代理商

商鋪產品：38條

所在地區：上海上海市

聯系人：李先生（銷售）

詢價 給他留言

產品簡介

To measure volumetric flowrate for conductive liquids and pulps. Several output signals are available.

詳細介紹

To measure volumetric flowrate for conductive liquids and pulps. Several output signals are available.
The main applications can be found in the following fields: chemical industry, power generation and distribution, mine, water treatment, paper industry, pharmaceutical industry, food and environmental protection.
The measurement is independent of the density, viscosity, temperature, pressure and conductivity of the measured fluid. No moving parts in the measuring tube. No pressure loss. Low requirement for the upstream and downstream straight pipes. It has a special suitability for
pulp measurement.

	For conductive liquids (>5μS/cm), even		85÷265Vac, 24Vac or 24Vdc power supply
	with a content of suspended solids.		4÷20mA, pulse and alarm output
	Range from <0,1m3/h to>70000m3/h		Soft rubber or PTFE lining material
	MODBUS RTU, PROFIBUS orHART		(FEP for DN10 only)
	communication protocol (opt.)		SS316, Hasloy B, Hasloy C,
	Best measurement accuracy ±0.2%		Titanium and Tantalum electrodes

Technical Data

Pipe dimension range	DN10÷ DN1600
Measure range	<0,6m³/h ÷ >70000m³/h
Fluid conductivity	>5μS/cm
Sensor material	SS321
Lining materials:	rubber; PTFE; FEP
Housing material	aluminum
Electrodes materials	SS 316 Hasloy B; Hasloy C; Titanium; Tantalium
Remote version operating temp.	rubber <80°C; FEP <100°C; PTFE <150°C (180°C peak value)
Compact version operating temp.	<70°C
Max. accuracy.	±0,5% standard; ±0,2% opt.
Max. repeatability	±0,07%
Fluid velocity	0m/s ÷ 10m/s
Open-collector output	30V; 250mA
Analog output	4÷20mA; max. load 750Ω
Protocol communication	RS485 (opt.); MODBUS RTU (opt.); PROFIBUS DP (opt.); HART (opt.)
Pulse output	1÷5000Hz
Power supply	85÷265Vac, 24Vac o 24Vdc
Consumption	<20W
Protection compact version	IP67 with 2 cable gland M20x1,5 for elect. connection
Protection remote version	IP67 / IP68 only pipe (opt.) with 4 cable gland M16x1,5 for connecting the electronic unit to the measurement pipe with 2 cable gland M20x1,5 for electrical connection