Battery Biased Fiber-Optic Detectors
Our battery biased fiber-optic detectors are coupled to a 1 m length singlemode fiberwith an FC connector. We have already done the alignment for you with these fiber models as the PIN diodes used for these particular models are quite small (<40 µm).
對比 | 型號 |
 | 818-BB-35F偏壓光電探測器，1000-1650nm，InGaAs，12.5 GHz，F(xiàn)C/UPC |
 | 818-BB-45F偏壓光電探測器，400-900nm，GaAs，12.5 GHz，F(xiàn)C/UPC |
 | 818-BB-51F偏壓光電探測器，1475-2100 nm，擴展型 InGaAs，12.5 GHz，F(xiàn)C/UPC |
產品規格
型號 |  818-BB-35F |  818-BB-45F |  818-BB-51F |
探測器材料 | InGaAs | GaAs | Extended InGaAs |
探測器直徑 | 0.032 mm | 0.040 mm | 0.040 mm |
探測器類型 | PIN | PIN | PIN |
波長范圍 | 1000-1650 nm | 500-890 nm | 830-2150 nm |
偏置電壓/偏壓 | 6 V | 6 V | 3 V |
3 dB 帶寬 | DC to 15 GHz | DC to 12.5 GHz | DC to 10 GHz |
上升時間 | 25 ps | 30 ps | 28 ps |
響應度 | 0.88 A/W @ 1550 nm | 0.45 A/W @ 850 nm | 0.95 A/W @ 2000 nm |
光纖接頭 | FC/UPC | FC/UPC | FC/UPC |
光纖類型 | Singlemode | Singlemode | Singlemode |
NEP | <0.04 pW/√Hz | <0.02 pW/√Hz | <0.6 pW/√Hz @ 2000 nm |
暗電流 | < 3 nA | < 200 pA | <1 µA |
飽和電流 | 10 mA | 10 mA | |
反向擊穿電壓 | 25 V | 30 V | |
結電容 | <0.12 pF | <0.3 pF | |
輸出接頭 | SMA | SMA | SMA |
螺紋類型 | 8-32 and M4 | 8-32 and M4 | 8-32 and M4 |
特征
Biased InGaAs Fiber-Optic Detector
The 818-BB-35F
features a 0.032
mm diameter battery biased InGaAs
photodetector with a wavelength range of 1000 to 1650
nm.
The detector is coupled to a 1 meter singlemode SMF 28e fiber with a FC/UPC connector. The
PIN Photodetector
utilizes the photovoltaic effect to convert optical power into an electrical current.
Battery Biased GaAs Fiber-Optic Detector
The 818-BB-45F
features a high speed 0.04
mm diameter battery biased GaAs
photodetector with a wavelength range of 400 to 900 nm.
The detector is coupled to a 1 meter singlemode SMF 28e fiber with a FC/UPC connector.
Extended InGaAs Fiber-Optic Detectors
The 818-BB-51F
features a high speed 0.04
mm diameter battery biased Extended InGaAs
photodetector with an extended wavelength range of 1475
to 2100 nm allowing monitoring of Thulium (Tm) and Holmium (Ho) doped lasers and other NIR lasers. The detector is coupled to a 1 meter singlemode SMF 28e fiber with a FC/UPC connector.
DC to 12.5 GHz Bandwidth
All of these high speed battery biased fiber-optic detectors offer a 3 dB bandwidth from DC to 12.5 GHz.
The Frequency response of the 818-BB-51F is shown below.
Frequency response of the 818-BB-51F
Measure Pulsewidth or Frequency Response
These high speed detectors make a great fiber-optic front end for an scope or spectrum analyzer.
When terminated into 50? into an oscilloscope, the pulsewidth of a laser can be measured. When terminated into a spectrum analyzer, the frequency response of a laser can be measured.
Optical Post Mounting
An 8-32 threaded hole at the bottom of 818-BB biased photoreceivers allows for optical post mounting.
Handle With ESD Care
These detectors are very susceptible to damage by electrostatic discharge (ESD). Please use ESD protective measures, like the FK-STRAP , when unpacking and handling these devices.
