DLC pro：數字控制用于可調二極管激光器的全數字控制器
極低的噪音和的控制
方便的本地和遠程操作
智能鎖定功能
DLC pro是一個平臺，可驅動TOPTICA的所有可調二極管激光器：適用于所有波長的控制器。
二極管激光器的性能在很大程度上取決于其控制器DLC pro是一個基于數字基礎的二極管激光控制器，DLC pro是一個基于數字基礎的二極管激光控制器，它對獲得所有關鍵參數的優良性能至關重要:窄激光線寬的低電流噪聲，穩定運行的出色的溫度控制和頻率調諧的壓電控制。
為了釋放此高性能控制器的全部潛能，提供了直觀的用戶界面：借助觸摸屏和旋鈕，可以輕松調整掃描，放大觀察到的功能，激活頻率鎖定等。數字基礎還可以實現全面的遠程控制，包括Windows計算機的GUI和命令界面。該接口對所有編程語言開放；提供了Python SDK。
許多應用需要參考激光的頻率。 TOPTICA提供滿足所有需求的解決方案：便捷的軟件解決方案DLC pro Lock直接集成到DLC pro中，而FALC pro提供了高性能鎖定。
DLC pro是二極管激光控制器的基準：具有優良性能的硬件，以以前沒有的便利性運行。
Python 支持 | 作為T(mén)OPTICA的Laser SDK的一部分，我們提供了DLC pro的Python支持，可通過pip安裝輕松獲得。 該軟件包又Python軟件包索引（PyPI）提供。 |
PC GUI | DLC pro的直觀PC GUI允許從計算機進行全部控制（需要Windows 8或更高版本）。 只需連接到實驗室中的任何激光器，并從其當前設置開始。 |
以太網絡 | 將DLC pro連接到局域網可以從計算機進行遠程控制，例如 通過PC GUI和命令界面。 支持DHCP和手動IP配置。 |
LabVIEW示例 | 在示例程序中演示了將DLC pro的控件集成到LabVIEW中的方法，請參見下面 |
氣壓補償 | 此功能可通過校正測得的氣壓變化來提高穩定性，并使波長更穩定。 |
配置管理器 | 配置管理器允許返回以前保存的激光設置。嘗試新的設置，例如鎖定參數會被大大簡化。 |
功率穩定 | 作為每個激光器的一部分，可以激活功率穩定反饋環路。 可以達到的帶寬會在下表的當前控制模塊CC-500和CC-5000的規格中列出。 |
寬掃描模式 | 寬掃描允許記錄和顯示高分辨率光譜掃描。 這對于CTL和DFB pro系統尤為重要，可以在激光二極管的整個波長范圍內進行掃描。 |
屏幕截圖 | 只需按一下按鈕，即可將觸摸屏界面的屏幕快照保存到USB驅動器。 |
General / Main Control MC
General / MC | |
Operator Controls | Touch Display, 10 push buttons, 4 knobs, 1 key switch |
Display | 7 inch, 800 x 480 pixels, 262 k colors |
Touch panel | Projective capacitive (PCT) with multi-touch capability |
Interfaces | Ethernet and USB |
Current Control CC-500 & CC-5000
Current Control CC-500 | Current Control CC-5000* | |
Max. laser current | 2x 245 mA or 1x 490 mA (selectable) | 5000 mA |
Max. laser voltage | 7 V @ 360 mA, 5 V @ 490 mA | 3.5 V |
Smallest current step | 0.015 μA | 5 μA |
Current noise density | 280 pA / sqrt(Hz) @ 1 kHz | 120 nA / sqrt(Hz) |
Low frequency current noise (0.1 Hz ... 10 Hz) | < 50 nA p-p | 10 μA p-p |
Temperature coefficient of laser current | <3 ppm / K typ. after > 1 h warm-up | |
Long-term stability of laser current | < 100 ppm / sqrt(khrs) after > 1 h warm-up | |
Modulation bandwidth (-3dB, 45°) | Between 15 kHz and 30 kHz | 100 Hz |
Achievable power stabilization bandwidth | DL pro: 10 kHz, CTL: 4 kHz | TA pro: 4 kHz, SHG pro: 1 kHz |
* For TA pro systems two CC-5000 can be combined to drive one amplifier chip at a higher current. | ||
Temperature Control TC
Temperature Control TC | |
Max. TEC current | 3 A |
Max. TEC voltage | 3 V @ 3 A / 12 V @ 3 A |
Smallest set temperature step | 50 μK |
Act. temperature noise (100 μHz ... 1 Hz) | < 300 μK p-p |
Repeatability of actual temperature | < 0.001 K after > 1 h warm-up |
Temperature coeff. of actual temperature | < 140 ppm K / K after > 1 h warm-up |
Piezo Control PC
Piezo Control PC | |
Piezo voltage range | -1 V ... +140 V |
Max. piezo current (charge / decharge) | 25 mA |
Smallest piezo voltage step | 0.01 mV |
Voltage noise density | 140 nV / sqrt (Hz) @ 1 kHz |
Temperature coefficient of piezo voltage | < 40 ppm / K |
Small signal bandwidth | 3 kHz (0 load) |
Inputs / Outputs
Inputs / Outputs | |
Analog inputs (BNC) | 2x (24 bit, DC .. 300 kHz) |
2x (16 /10 bits, DC .. 300 kHz / 1.7 MHz) | |
Input range, impedance | -4 V ... + 4V, 10 kOhm |
Analog outputs (BNC) | 2x (16 bits, DC .. 300 kHz) |
Output range, impedance | -4 V ... + 4V (no load), 50 Ohm |
Digital inputs** | 4x TTL, 10 kOhm, Sub-HD 15-pin |
Digital outputs** | 4x TTL, 50 kOhm, Sub-HD 15-pin |
** Optional break-out cable with 8 SMB connectors available. | |
Environmental, Power Supply PS
Environment / Supply | |
Voltage requirements | 100 - 240 V~, 50 / 60 Hz |
Power requirements | 250 W max., typ. 35 W, no active cooling fans |
Size (H x W x D) | 154 mm x 450 mm x 348 mm |
Weight | 8.0 kg (with MC, CC-500, PC, TC) |
Operating temperature | 5 °C ... 40 °C |
Transport temperature | 0 °C ... 40 °C |
Relative humidity | 80 % for up to 31 °C, decr. lin. to 50 % at 40 °C |
DLC ext
The DLC ext allows extending the DLC pro with TOPTICA’s well-established fast locking modules. | |
Number of possible modules | 2 |
Supported modules | PDD 110,FALC 110,mFALC 110,DigiLock 110 |
Size (H x W x D) | 131 mm (+67 mm) x 184 mm x 286 mm |
Power supply | 90 - 264 VAC (47 - 63 Hz), external, automatic mains voltage detection |
[Translate to Chinese:] TOPTICA tunable diode lasers: Available wavelengths and corresponding output power
[Translate to Chinese:] Linewidth measurement DLC DL pro: Delayed self-heterodyne linewidth measurement. Due to the long coherence length periodic modulation appears. The linewidth is obtained from the modulation depth.
[Translate to Chinese:] Frequency noise measurement DLC DL pro: Frequency noise density of the laser light created with a DLC DL pro and a SYST DL pro
[Translate to Chinese:] DLC pro current noise measurement: Comparison of the current noise density of the current control modules.
[Translate to Chinese:] DLC ext: allows for equipping DLC pro driven laser systems with high performance locking modules
[Translate to Chinese:] DLC pro temperature stability measurement: Temperature of a DL pro laser head connected to a laser control electronics, which is located in a climate chamber and exposed to the temperature sequence shown by the blue line.
[Translate to Chinese:] DLC pro: Breakout cable for digital signals K DLC/DIGITAL I/O
?FALC pro: External high performance locking modul for frequency locking, e.g. in phase locks or locks frequency combs or to reference cavities if combined with PDH/DLC pro.
?PDH/DLC pro: Built-in module for the DLC pro to generate error signals for Pound-Drever-Hall locks.
?DLC pro Lock: Software license for DLC pro
Applications
?Atom Laser Cooling & Trapping
?Ion Laser Cooling & Trapping
?BEC / Degenerate Fermi Gases
?Optical Clocks
?Rydberg Excitation
?Optical Pumping & EIT
?Fundamental Constants
?Interferometry
?Quantum Cryptography
?Quantum Information
?Quantum Dots & Microcavities
?Magnetic Field Measurement
公司介紹
德國Toptica公司為科研及工業應用開發并制造激光系統，產品線包括二極管激光器，超快光纖激光，太赫茲系統以及頻率梳等。TOPTICA激光器優良的性能表現，可靠性以及使用壽命收到各方OEM客戶，科學家以及多位諾貝爾獎獲得者的首肯。
